This site will be further used for archiving purposes.
POSTING and REGISTRATION DISABLED.
Please visit our new website and create a new account! www.ppsc.darkbb.com!! Thank you! NOTE: account activation needed! ;D
Subject: MM KT sub or Commssa sub (sbe ni clyde) Wed Apr 29, 2009 8:18 pm
First of all, i want to give credit to mark from PhiliPens. I got this idea from his bonkura kt sub.
Stats:
Spoiler:
------------------------------------------------------------ Name: MM KT sub COG: COP Length: 20.5 cm (2 tips) 21.5 cm (4 tips) Weight: 14-15 g (2 tips) 23-25 g (4 tips) Style: Double sided Writing mech: n/a ink: n/a Estimated cost: P330 (that leaves you with 10 left over markers cause lil hands markers cost 66.50 per set of 12)
pros: double sided looks like mm kt 12 colors of caps to choose from can be easily adjusted from 1st variation to the 2nd
cons: double sided kinda risky to mod(i'll explain later) caps are kind slippery ----------------------------------------------------------
Materials
Spoiler:
------------------------------------------------------------------ Materials: 2 Pilot supergrip mech pen (clear) *sorry i used the black ones in the tutorial..i kinda ran out of clear grips..sorry..* 2 lil hands marker 2 or 4 Faber castell gripmatic tips (with or without the black inner part)
Step 1: Disassemble the barrel. You only need the white tube.
Step 2
Spoiler:
Step 2: Take the caps and measure 1.5 cm. Cut off the 1.5 cm of the cap.
Step 3
Spoiler:
Step 3: As you can see below, the cap of the lil hands marker are made up of 2 main parts, the outer cap(the main cap) and inner cap (that little circle you see in the picture below) . You need to cut off .6 cm of the OUTER CAP ONLY. If you cut the cap all the way through the tip would no longer have anything to hold on to and then it will be easily removed.( you can sand the edges if you think it's a little rough for the tip to rest on it. But don't sand it too much as it might become to loose.)
heres how to do it. Divide the .6cm to 3 .2cm.
After dividing them, gently cut each division. this takes a lot of patience.
Do the same on the other 2 divisions. You should have something that looks like this.
WARNING THIS STEP MAY COMPLETELY DESTROY YOUR CAP. BE SURE TO PRACTICE ON ONE OF YOUR LIL HANDS MARKER CAPS THAT YOU WONT USE TO MAKE SURE YOU WONT DESTROY THE CAP YOU ARE GOING TO USE OR ELSE THIS MIGHT HAPPEN TO YOU.
1. Cut straight through the cap = using too much force. 2. Crack at the cap = making a small cut and trying to pull everything else off. 3. Incomplete = same as #2
1-get another cap. 2-can be fixed with alot, and i mean alot of teflon tape. 3-this might hold your tip for a while, but it wont last long. add tons of teflon tape.
Step 4:
Spoiler:
Step 4: Just put the tip on top of the caps. If you have cut the caps the right way it should be a snug fit. If not, the tips might be slanted a little bit or it will not hold the tip in place at all.
hehe mine's not falling..:P
still not falling..
lets be more serious. the reason you have to put the tip in place is not because your about to finish your mod. you do this to check if the tip is evenly resting on the cap. it shouldnt be slanted or anything. to fix this, you can just sand/file the caps. heres a pic. note
Step 5
Spoiler:
Step 5: Remove the tip. Place some teflon tape just like in the picture. The quantity of teflon tape depends on how your cap ended up.
Spoiler:
Step 6: Put a layer of masking tape and fold it inwards the empty tube. This will help it become more balanced and make the cap more secure.
Step 7
Spoiler:
Step 7: Put the tips and grips on. You now have a complete mm kt/comssa sub!
4 tipped version:
Spoiler:
****there is an optional step if you want to make it heavier**** Optional: Put another gripmatic tip on top of each tip(that would mean you'll need 4 gripmatics in total). Adjust the grips higher until it reaches the edge of the 2nd tip. You could also put some teflon tape between the two tips to make it more secure.
Need help?
Spoiler:
What to do if:
1. The caps are a little too loose at the back: - add more layers of tape to thicken the barrel.
2. I cut all the way through the caps: -i told you to practice first..sorry i cant do anything about that...
3. I sanded the caps down a little too much: -use some teflon tape until the tips remains secure.
4. I don't think that looks like a mm kt: -Just imagine...just imagine...
5. I don't have clear grips: -its ok..i just thought that the clear grips looked more like mm kts so i used them. But you can use whichever you like..=]
Mod Test
Spoiler:
Comments and suggestions will be much appreciated..=]
Spoiler:
:P
Last edited by JoooooB on Fri May 01, 2009 7:44 pm; edited 4 times in total (Reason for editing : remade the whole tutorial)
bahamuth091 New Member
Gender : Age : 36 Post Count : 1
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Wed Apr 29, 2009 10:42 pm
the mod looks clean and the tutorial is nice and clear at the same time
I will try to make a mod like this one haha )
Thanks for posting...
JoooooB
Gender : Age : 30 Post Count : 719
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Thu Apr 30, 2009 8:50 am
Please wait for further updates. Im going to add a mini tutorial about step 3 maybe this week. :P
chrisPS
Gender : Age : 29 Post Count : 672
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Sat May 23, 2009 11:52 am
LOL, already had this before you made the tut... maybe my mod was what Clyde saw...
johnrey132 Member
Gender : Age : 33 Post Count : 35
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Sun May 31, 2009 3:47 pm
hey bro this is mark from philipens.. thanks for sharing it here.. maybe you should try the pilot G2- ex tip, coz it has the same weight like the tip of dr. grip
spikez Member
Gender : Age : 31 Post Count : 72
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Tue Jun 30, 2009 8:21 pm
give me some tips of cutting grips! i've try it it really hard!
thnx! for posting
spikez Member
Gender : Age : 31 Post Count : 72
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Tue Jun 30, 2009 8:27 pm
give me some tips of cutting grips! i've try it it really hard!
thnx! for posting
spikez Member
Gender : Age : 31 Post Count : 72
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Tue Jun 30, 2009 8:27 pm
give me some tips of cutting grips! i've try it it really hard!
thnx! for posting
Clyde Post Master
Gender : Age : 29 Post Count : 290
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Wed Jul 01, 2009 8:39 pm
Just use scissors <_<. I use scissors when the grip has lines since it's VERY easy to cut it. If I'm doing a grip cut (like on an Ayatori, kUzu, etc.) I use an x-acto knife. If you're cutting airfit grips, Dr. Grip grips, or any other grip which has no lines, use a blade, x-acto, cutter, knife, etc.
Clyde Post Master
Gender : Age : 29 Post Count : 290
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Wed Jul 01, 2009 8:42 pm
johnrey132 wrote:
hey bro this is mark from philipens.. thanks for sharing it here.. maybe you should try the pilot G2- ex tip, coz it has the same weight like the tip of dr. grip
It doesn't have the same weight.
spikez Member
Gender : Age : 31 Post Count : 72
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Fri Jul 03, 2009 8:29 am
thnx po!
Buster New Member
Gender : Age : 27 Post Count : 11
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Wed Aug 19, 2009 12:18 pm
Maybe you guys dont know the what a comssa is. Comssa's are light and not suppose to be heavy OK.
Carbon
Gender : Age : 34 Post Count : 498
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Thu Aug 20, 2009 1:31 pm
Buster wrote:
Maybe you guys dont know the what a comssa is. Comssa's are light and not suppose to be heavy OK.
Could you compare it with other mods in terms of weight? Like: is it heavier than a ball sign? is it lighter than a rsvp mx?
or something like that..
rebbborn17 New Member
Gender : Age : 29 Post Count : 2
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Fri Sep 25, 2009 9:30 am
panu tangalin ung ink nung lil hand marker?? hnd ko kc matangal ung sa taas, laging nadudurog pag sinusubukan kong tangalin xP... pls reply
JoooooB
Gender : Age : 30 Post Count : 719
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Fri Sep 25, 2009 4:48 pm
rebbborn17 wrote:
panu tangalin ung ink nung lil hand marker?? hnd ko kc matangal ung sa taas, laging nadudurog pag sinusubukan kong tangalin xP... pls reply
gnagawa ko iniipit ko ng knti gmet scissors. den hnahatak ko. pde den cutter pliers.
{TH}Enzo Tropang Hayop Leader
Gender : Age : 29 Post Count : 1855
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Mon Sep 28, 2009 4:49 pm
i want to make a mod like this! wait until I've posted it.D
{TH}Gerard Post Master
Gender : Age : 29 Post Count : 301
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Thu Oct 01, 2009 5:24 pm
astig mmkt!!! amf! anu materials niyan? hhehe
{TH}Enzo Tropang Hayop Leader
Gender : Age : 29 Post Count : 1855
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Sat Oct 10, 2009 12:37 pm
Can I use Sailor Gels for the Grips?
Tremor
Gender : Age : 44 Post Count : 404
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Tue Oct 27, 2009 7:53 pm
wow i'll put this on my reference when i get better on penspinning. awsome mod.
Tremor
Gender : Age : 44 Post Count : 404
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Thu Oct 29, 2009 6:07 pm
finished
love it! the weight is just right(used 2 faber castell tips).
GAME Post Maniac
Gender : Age : 32 Post Count : 1718
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Thu Oct 29, 2009 7:16 pm
tremor wrote:
finished
love it! the weight is just right(used 2 faber castell tips).
nice color combination, i was thinking of that taeryong-ish color before.. how long is that? i guess mark's version is longer for about a cm i guess?
{TH}Enzo Tropang Hayop Leader
Gender : Age : 29 Post Count : 1855
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Thu Oct 29, 2009 8:09 pm
tremor wrote:
finished
love it! the weight is just right(used 2 faber castell tips).
nice..^_^ heavy mods are ideal for using tricks that uses momentum such as Bak.^_^ ganun. HAHA!
Tremor
Gender : Age : 44 Post Count : 404
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Thu Oct 29, 2009 8:45 pm
game wrote:
tremor wrote:
finished
love it! the weight is just right(used 2 faber castell tips).
nice color combination, i was thinking of that taeryong-ish color before.. how long is that? i guess mark's version is longer for about a cm i guess?
about 21cm...
riverboy Pen Spinner
Gender : Age : 28 Post Count : 206
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Thu Oct 29, 2009 9:35 pm
Just because clyde made it, it's not necessarily the best. it's a pretty okay sub though.
GAME Post Maniac
Gender : Age : 32 Post Count : 1718
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde) Thu Oct 29, 2009 10:01 pm
riverboy wrote:
Just because clyde made it, it's not necessarily the best. it's a pretty okay sub though.
clyde didnt invented this one.. ^__^
Sponsored content
Subject: Re: MM KT sub or Commssa sub (sbe ni clyde)
Thank you! NOTE: account activation needed! ;D 
WARNING 
wait until I've posted it.D
hhehe
